1. Equipped with high-performance high-frequency friction movement, the joint is stable without maintenance of hot knife,
and the interface strength reaches 80%.
2. Threading at any height, no need to reset the machine head, maximizing efficiency.
3. The firm main frame and transmission system promise a lifetime warranty against damage caused by non external environment.
4. The machine head balance force system, the four corners force more evenly balanced force.
5. Independent packing belt distributor with turning gear, wire rail drive, electromagnetic brake and buffer device can
effectively prevent damage Bad strapping.
6. The control system and human-machine interface based on Siemens S7-200SMART can also be configured with a separate console Additional
PLC of higher specification and communication modules such as Ethernet interface and MES interface
shall be configured according to customer requirements.
7. The maximum pressing force is 3 tons, and the pressing force is infinitely adjustable. The goods are bundled after being slightly compressed,
The goods rebound to ensure the best binding effect.
8. The number of tapes, mode and pressing force can be taught on the screen.
9. Completely independently researched, developed and produced hand pieces and core accessories, greatly reducing the cost of later maintenance.
10. Realize automatic addition of paper corner protection, no need to add edge protection, and reduce the cost of corner protection consumables.
11. The double heads can be used for strapping at the same time, and the strapping spacing can be adjusted
from 550mm (minimum) to 1000mm (maximum), which can adapt to the use of pallets with more specifications,
and the strapping efficiency is higher.
12. The equipment adopts color recognition photoelectric device to avoid cardboard blocking.
Equipment parameters:
No. | Item | Specification | Remarks |
1 | Power supply | 3/N,PE,380V |
|
2 | Control voltage | 24V DC |
|
3 | Power | 4KW |
|
4 | Machine weight | 1500kg |
|
5 | Standard cargo size | 1200W * 1200L *2400H | mm |
6 | Strapping speed | 35″/dual channel | Including protective paper |
7 | Positioning Settings | Touch screen numerical control teaching arbitrary setting | Multi program mode programming optional |
8 | Plate pressure | 3000kg |
|
9 | Movement speed | 180 mm/ sec |
|
10 | Number of paper protection bins | 200 (single warehouse) |
|
11 | Hourly products | 70± pallets | Reference speed, excluding logistics time |
12 | Tape position error | ±30mm |
|
Strapping head parameters:
|
No. | Item | Specification | Remarks |
1 | Belt feeding speed | 3.5m/s |
|
2 | Binding force | 200-3500N |
|
3 | Material of strapping belt | PET |
|
4 | Width of strapping belt | 12 or 16 mm |
|
5 | Thickness of strapping belt | 0.55-0.8mm |
|
6 | weight | Approx.55Kg |
|
7 | Welding method | High frequency friction |
|
8 | power | 0.45KW |
|
9 | Lap strength | 80% | According to the belt mass |
10 | Control power | DC24V |
|
11 | Power supply | DC48V |
|